Skip to main content

๐Ÿ‚ Autumn Sale Event โ€” Enjoy 15% OFF. Ends in --:--

Yacht name lettering: topsides and transom proportions

Get the transom and topsides proportions right, then check the real width in the designer before you order.

5 min read

Last reviewed: 14 November 2026

Rules and materials guidance can change. Confirm details with the relevant UK authority before relying on stickers for a legal marking.

A yacht name has two jobs. On the transom it is the boat's signature, read by everyone behind you in the marina. On the topsides it identifies the boat from alongside. The proportions that look right in each place are different, and this guide covers how to get both right with vinyl lettering.

Transom or topsides?

  • Transom. The transom is the traditional place for the name, often with the home port underneath. The panel is short and often curved or raked, and it may be broken by a bathing platform, ladder or exhausts, so measure the flat area you can actually use.
  • Topsides. A name on each side of the bow or along the topsides is easy to read from a pontoon or another boat. You usually have more length here, but the hull may curve towards the bow, so keep the name on the flatter section.
  • Both. Many owners letter the transom and both sides. Keep the font and colour the same, and let the size change to suit each panel.

Getting the proportions right

  • Fit the panel, then fill it. A name that is too small looks lost on a large transom, and one that runs edge to edge looks cramped. Leaving clear space around the name usually looks more deliberate.
  • The home port is secondary. If you add one, set it noticeably smaller than the name and centre it underneath.
  • Mind the curve. Vinyl follows gentle curves well. Avoid running letters across sharp changes in shape or over seams and fittings.
  • Check the width in the designer. Script fonts set much wider than block capitals at the same height. Type the name into the boat name designer and compare the width with your measurement. Our lettering sizes guide explains the trade-off.

Registered yachts

If your yacht is on the Small Ships Register, the SSR number is a separate marking with its own rules. Read SSR registration markings. Part I registered vessels have their own marking requirements, and stick-on vinyl is not a substitute for official Part I markings. Our UK marking guide compares the schemes.

Names that suit a yacht

Short, elegant names suit most transoms. Open any of these to see it as lettering:

For more, choose Classy or Luxury in the free boat name generator. When the layout is right, order the lettering from boat name stickers.